SAE J2635-2007

SAE J2635 噴漆鋁車輪和噴漆鋁車輪裝飾的絲狀腐蝕試驗程序(鍍鋁輪子和鍍鋁輪眉的絲狀腐蝕試驗規程)

SAE J2635-2007發行信息

標準號SAE J 2635-2007

中文名噴漆鋁車輪和噴漆鋁車輪裝飾的絲狀腐蝕試驗程序

英文名Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim

發布日期2007-08-01

實施日期

廢止日期無

中國標準分類號T22

國際標準分類號43.040.50

發布單位US-SAE

引用標準ASTM B 368-1997 ASTM D 1193-2006 SAE J 2634-2003 SAE J 2636-2006

SAE J2635-2007適用范圍

This test procedure defines a laboratory procedure for generating and evaluating filiform corrosion on painted aluminum wheels and painted aluminum wheel trim. While this test was developed specifically for the testing of painted aluminum wheels and wheel trim it may be applicable to other components. The application owner will need to assess if this test generates filiform similar to that found in the relevant usage to ensure it will provide accurate data for the application. To establish a uniform test method for the wheel and wheel trim industry when assessing the resistance of components to filiform corrosion. An objective is to reduce test procedure proliferation and thereby reduce costs for establishing and maintaining unique test facilities, test methods, measurement methods, laboratory accreditations, and operator training. The net effect is to reduce cost while improving the quality of the test data by adopting uniform and standardized test methods. The procedure does not establish performance standards for the components. Performance standards are to be established by the users of the test and/or their clients. The method and format for documenting proficiency is defined.

本試驗程序規定了在涂漆鋁車輪和涂漆鋁車輪裝飾件上產生和評估絲狀腐蝕的實驗室程序。雖然本試驗專為測試涂漆鋁車輪和車輪裝飾件而開發，但它可能適用于其他部件。應用程序所有者需要評估此測試是否生成與相關使用中發現的絲狀相似的絲狀，以確保為應用程序提供準確的數據。在評估部件耐絲狀腐蝕性時，為車輪和車輪裝飾件行業建立統一的試驗方法。目標是減少測試程序的擴散，從而降低建立和維護獨特測試設施、測試方法、測量方法、實驗室認證和操作員培訓的成本。凈效果是通過采用統一和標準化的測試方法，在降低成本的同時提高測試數據的質量。本程序未建立部件的性能標準。性能標準由測試用戶和/或其客戶制定。定義了記錄熟練程度的方法和格式。