首頁 > 標準大全 > ASTM D2803 - 09(2015)標準詳情

ASTM D2803 - 09(2015)

　　本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用。我們?cè)敢夂湍涣鰽STM D2803 - 09(2015)標準細節信息或ASTM D2803 - 09(2015)測試方法，歡迎致電【18566398802】

ASTM D2803 - 09(2015)標準介紹

金屬有機涂層耐絲狀銹蝕的試驗用標準指南是關于《金屬有機涂層耐絲狀銹蝕的試驗用標準指南》，最新標準版本復審于2015年。

ASTM D2803 - 09(2015)英文簡介

1. Scope

1.1 This guide covers three procedures for determining the susceptibility of organic-coated metal substrates to formation of filiform corrosion.

1.2 This guide is limited to the determination of whether filiform corrosion will occur between the organic coating and substrate.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1: Procedure B of this standard is equivalent to ISO 4623.

2. Referenced Documents

ASTM Standards

B117 Practice for Operating Salt Spray (Fog) Apparatus

D609 Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

D823 Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels

D1005 Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers

D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

D1730 Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

D7091 Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

E104 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions

International Standard

ISO 4623–1 Paints and Varnishes--Determination of resistance to filiform corrosion-Part 1: On steel

ISO 4623–2 Paints and Varnishes--Determination of resistance to filiform corrosion-Part 2: On aluminum

ISO 4628–10 Paints and Varnishes--Evaluation of degradation of coatings--Designation of quantity and size of defects and of intensity of changes-Part 10: Assessment of filiform corrosion

Q-fog鹽霧試驗箱用于ASTM D2803 - 09(2015)的測試步驟

溫馨提醒：本ASTM D2803 - 09(2015)可能存在更新的版本，建議尋找ASTM D2803 - 09(2015)的發行商確認。

符合 ASTM D2803 - 09(2015) 標準的
老化試驗箱

鹽霧試驗箱
Q-FOG CRH1100是一款的具有相對濕度控制功能和溶液噴淋功能的鹽霧試驗箱.
Q-FOG CRH1100 馬上詢價
鹽霧試驗箱
Q-FOG CRH600比起SSP/CCT鹽霧試驗箱增加了一個可調濕度控制功能，這意味著CRH鹽霧試驗箱具備更廣泛的標準適用范圍。
Q-FOG CRH600 馬上詢價
交變鹽霧試驗箱
CRH交變鹽霧試驗箱可提供對自然大氣腐蝕極佳的實驗室模擬，可滿足ASTM B117，ASTM B368，ASTM D1654，ASTM D1735等標準的測試要求。
CRH-600 馬上詢價

近期文章